Performing a routine oil change on your Everyday Mitsubishi Outlander is essential to maintain engine performance and extend the life of your vehicle. Regular oil changes help keep the engine lubricated, reduce wear, and prevent overheating.

What You'll Need

  • New engine oil (check your owner’s manual for the correct type and amount)
  • New oil filter
  • Oil filter wrench
  • Socket wrench or spanner
  • Oil drain pan
  • Funnel
  • Clean rags or paper towels
  • Gloves and safety glasses

Step-by-Step Oil Change Guide

  1. Prepare Your Vehicle: Park your Mitsubishi Outlander on a level surface and turn off the engine. Allow it to cool for 10-15 minutes to avoid burns.
  2. Drain the Old Oil: Locate the oil drain plug under the engine. Place the drain pan underneath and use a wrench to loosen the plug. Let all the old oil drain out completely.
  3. Replace the Oil Filter: Use the oil filter wrench to remove the old filter. Prepare the new filter by applying a small amount of new oil to the gasket, then screw it in place by hand until snug.
  4. Refill with New Oil: Replace the drain plug securely. Open the hood and remove the oil filler cap. Using a funnel, pour in the recommended amount and type of new oil.
  5. Check Oil Level: Use the dipstick to ensure the oil level is correct. Add more oil if necessary.
  6. Clean Up and Dispose Properly: Wipe any spilled oil, replace the oil cap, and safely dispose of the used oil and filter at a recycling center.

By following these steps regularly, you’ll keep your Mitsubishi Outlander running smoothly and efficiently. If you prefer, professional maintenance is always available at Everyday Mitsubishi service centers.