Replacing the brakes on your Mitsubishi Mirage G4 is a crucial maintenance task that ensures your vehicle remains safe and responsive. With the right tools and a bit of patience, you can perform a brake replacement at home and save on costly service fees.

Tools and Materials Needed

  • New brake pads and rotors compatible with the Mirage G4
  • Jack and jack stands
  • Lug wrench
  • Socket wrench set
  • C-clamp or brake caliper tool
  • Brake cleaner spray
  • Protective gloves and safety glasses
  • Torque wrench

Step-by-Step Brake Replacement Process

Follow these steps carefully to replace your Mitsubishi Mirage G4’s brakes:

  1. Lift the Vehicle: Use the jack to raise the front or rear of the car and secure it with jack stands. Remove the wheel using the lug wrench.
  2. Remove the Brake Caliper: Unbolt the caliper and carefully hang it with a wire to avoid strain on the brake hose.
  3. Remove Old Brake Pads and Rotors: Slide out the old brake pads and remove the rotor if necessary.
  4. Clean and Inspect: Use brake cleaner to remove dust and inspect components for wear or damage.
  5. Install New Rotors and Pads: Place the new rotor and brake pads in position.
  6. Reassemble the Caliper: Compress the caliper piston with a C-clamp and bolt the caliper back in place.
  7. Reinstall the Wheel: Put the wheel back on and tighten lug nuts by hand.
  8. Lower the Vehicle and Torque Lug Nuts: Remove jack stands and lower the car, then torque the lug nuts to manufacturer specifications.
  9. Test Your Brakes: Before driving, pump the brake pedal a few times to ensure proper pad seating and brake function.

Performing brake replacement regularly on your Mitsubishi Mirage G4 helps maintain optimal stopping power and keeps you safe on the road. If you’re unsure or uncomfortable with any step, consult a professional mechanic.